You're in > TPG Members Forum > Heating, Lighting and Equipment > heat emitter 'bulbs' |
|
heat emitter 'bulbs' Posted: 14/06/2008 by shazzler |
|
hi , ive just bought a ceramic heat emitter 'bulb' with a screw in end, now ive tried it in a normal screw lamp that it fits but it doesnt work, do they have to be used in conjunction with a specific heat lamp or is my 'bulb' just a dud one, any advice greatly recieved with thanks xxx | |
Re: heat emitter 'bulbs' Posted: 14/06/2008 by tpgNina |
|
I think I'm right in saying that you must use the ceramic heat emitters in a ceramic fitting. They get very hot an will burn out an ordinary lamp fitting. That could be your problem. Was there anything on the box it came in that said it should be used with a ceramic fitting? | |
Re: heat emitter 'bulbs' Posted: 14/06/2008 by shazzler |
|
yes nina, its an exo terra heat emitter lamp, ive actually got a ceramic lamp holder on its way to me thru the post but i needed to know if the lamp worked so we tried it in an ordinary lamp but it didint heat up at all so im guessing either the terminals are not right or the 'bulb'is faulty, will wait till the lamp holder arrives and try again, thanks hun xxxx | |
Re: heat emitter 'bulbs' Posted: 14/06/2008 by tpgNina |
|
The thing about ceramic heat emitters, is if you can get it working it will last forever! For some reason they just don't die. I've got one in my corn snake's cage that has been there for just under 21 years, and is still going strong. So I hope you can get it to work OK. Is it for an outdoor house? | |
Re: heat emitter 'bulbs' Posted: 15/06/2008 by tpgarlene |
|
Hi. I really like the ceramic bulbs, and use them in the greenhouse overnight when the temps go down a bit. They give out a nice gentle, and quite localised heat, so that you are warming the area where the tortoise is, rather than the whole greenhouse, which helps with the fuel bill a bit! I think they should only be used with a ceramic fitting, but they do seem to need to be screwed in quite firmly. So if it doesnt seem to be working, try screwing it in a bit further. Arlene | |
Re: heat emitter 'bulbs' Posted: 15/06/2008 by shazzler |
|
Thanks everybody for your advice, i cant wait for the lamp holder to arrive so i can try it again, fingers crossed, i need to be able to warm twiglets out house overnight, thermostat is also in the post im just being very impatient | |
Re: heat emitter 'bulbs' Posted: 16/06/2008 by shazzler |
|
hi Arlene & nina, well my clamp lamp holder has arrived and ive had to change the actual lamp because as i suspected it was faulty. is anybody online now as i was going to post a question but if nobodys there tonight it doesnt matter xxxxx | |
Re: heat emitter 'bulbs' Posted: 16/06/2008 by tpgNina |
|
I'm here! It's just after 10 p.m., and I'll be online for about another half hour. | |